one541
-Interested User-
Posts: 6
Joined: May 6, 2020
|
Posted: May 6, 2020 09:24 PM
Msg. 1 of 3
Hi,
I noticed that when I set the login/password that are incorrect via the admin socket and connect, I am not able to get any errors that it was invalid. Is this by design, because I would like to run iqconnect.exe headless inside a docker container - so I would require any login error messages to alerted to me via my feed handler's logging system.
Could you please advise.
Thanks
|
DTN Todd
-Interested User-
Posts: 74
Joined: Mar 24, 2010
|
Posted: May 6, 2020 10:22 PM
Msg. 2 of 3
Hello one541
I will have our Developer support team look into this, they should have a response for you within 24 hours
Thanks Todd
|
DTN_Gary_Stephen
-DTN Guru-
Posts: 394
Joined: Jul 3, 2019
|
Posted: May 7, 2020 03:01 PM
Msg. 3 of 3
Hello, this is Gary from DTN IQFeed API Support.
You are correct that the S,SET LOGIN and S,SET PASSWORD commands in the Admin port don't validate what you send them. Validation is only done if you try to connect with an S,CONNECT command (or connection is set to happen automatically somehow). There is no explicit message associated with connection or failing to connect, however: the S,STATS message will contain either Connected or Not Connected. You could monitor that field to know if you are connected or not.
I hope this is helpful. Let me know if you have any followup questions on this!
Sincerely, Gary Stephen DTN IQFeed Implementation Support Specialist
|